Ford Intake and Radiator Grille Installation Videos

If you’re lowering your C8 Z06, you need to see this. When you drop the ride height, the factory wheels can look a bit "tucked" inside those massive fenders. To get that flush, aggressive look, we’re adding 20mm rear wheel spacers from Paragon Performance. Why we love this mod: 🛠️ Simple Install: A true "no-brainer" that can be done in minutes. 📦 Complete Kit: Comes with all the necessary hardware for a secure fit. ✨ The Stance: It perfectly fills out the wheel arches, giving the Z06 the wide-track look it deserves. The Results: Just check out that before vs. after! It’s a subtle change that makes a massive difference in the car's presence on the road. Note: While we don't sell these spacers at RGS, we’re all about sharing the best DIY tips to help you dial in your build! Are you a fan of the flush look, or do you prefer the OEM tuck? Let us know below! 👇 #C8Z06 #CorvetteZ06 #WheelSpacers #Stance #RGS

The Z06 just got a major attitude adjustment. We decided to hunkered down our C8 Z06 using Paragon Lowering Collars and 20mm rear spacers. While we don't sell these specific suspension components at Radiator Grille Store, we’re all about sharing the DIY process to help the community get that perfect look. The Game Plan: Front: De-pinned the Mag Ride and swapped factory collars for the Paragon units. Rear: Adjusted the threaded spring seats (Pro tip: use Gorilla Tape if the ring starts spinning!). The Flush Look: Added 20mm spacers to push the wheels out to the edge of the arches. The Results: 📉 Front: ~1" Drop (28.25" down to 27.25") 📉 Rear: ~5/8" Drop (29" down to ~28.37") The stance is now aggressive, the Mag Ride still feels like factory, and that wheel gap is officially gone. Want to see more Porsche and Corvette DIYs? Head over to radiatorgrillestore.com for more tutorials and the protection parts we do specialize in! #C8Z06 #CorvetteZ06 #LoweredLife #CorvetteMods #RGS

We’re swapping the factory body-colored splitter on our Z06 for the EOS Carbon Flash 3-Piece Front Splitter. This is an OEM-style fit that adds that aggressive Z07-inspired edge to any Z06 or E-Ray. The Install Breakdown: Prep: Safely lift the car using lifting pucks and remove the inner wheel well liner panels for access. Remove: Back out the 7mm bolts around the perimeter and gently pry out the 6 plastic trim clips (using our RGS trim tools!). Swap: Line up the new 3-piece EOS splitter. The fit and finish are spot on—no drilling or extra mods required. Pro-Tip: Make sure to tuck the wheel well liners back into the end of the splitter before your final tighten! The Bonus: We added an Amplify Orange pinstripe to the lip to perfectly tie in the side skirts and rear. 🍊🔥 Which look wins? Cast your vote for #BodyColor or #CarbonFlash in the comments! 🛒 Shop the Z06/E-Ray Splitter & Trim Tools: radiatorgrillestore.com #C8Z06 #CorvetteERay #CorvetteMods #Z06 #RGS

Upgrade the most visible part of your C8 interior with a detail that makes a difference. This 5-piece Upper Dash Trim Overlay Kit adds a refined, custom-painted accent around the steering wheel and gauge cluster, creating a cohesive OEM look that feels intentional and balanced. Each piece is color-matched to factory Chevy finishes or hydrocarbon and designed for a precision fit that installs cleanly with pre-installed 3M automotive VHB tape. No tools. No modifications. Built for 2020-2025 C8 Stingray, Z06, and E-Ray models. A simple upgrade that delivers real visual impact while preserving factory character. Custom-painted to order. Many colors are available for immediate shipment. Some lower production volume colors, please allow 3-4 weeks for production. → radiatorgrillestore.com | LINK IN BIO #RadiatorGrilleStore #RGS #C8Corvette #CorvetteInterior #CorvetteMods #VetteLife #OEMPlus

Installing the side intake grilles on a ZR1/ZR1X is a nearly identical process to that of the Z06/E-Ray side intake grilles. Made of durable ABS plastic, these grilles help keep road debris out without obstructing airflow. Protect your ZR1/ZR1X side intakes with these RGS grilles (coming soon, currently in development phase).

In this video, we install Paragon Lowering Collars on a Chevrolet Corvette C8 Z06 to dial in a more aggressive stance while maintaining factory ride quality and functionality. Instead of replacing springs or compromising the magnetic ride system, lowering collars allow for precise ride height adjustment using the OEM suspension setup. Vehicle: Chevrolet Corvette C8 Z06 Product: Paragon Performance Lowering Collars Be sure to like, comment, and subscribe for more C8 Z06 installs, performance upgrades, and in-depth modification content.

Take your 2023+ Chevrolet Corvette C8 Z06 or E-Ray to the next level with the EOS 3-Piece Front Splitter, a premium exterior upgrade designed to enhance the aggressive styling of Chevrolet’s high-performance platform. In this video, we take a closer look at the design, fitment, and installation process of the EOS front splitter kit. Specifically engineered for the C8 Z06 and E-Ray, this three-piece configuration follows the factory body lines for a seamless, OEM-plus appearance while delivering a noticeably more track-inspired front-end presence. This splitter is available in two finish options: • Carbon Flash Metallic • Real Carbon Fiber We’ll walk through: ✔️ Quality overview ✔️ Fitment details ✔️ Installation steps and hardware ✔️ Final installed look from multiple angles Whether you're building a show car, a street-focused performance setup, or simply want a more commanding road presence, the EOS 3-Piece Front Splitter delivers an aggressive transformation without overcomplicating installation. If you’re modifying your C8 Z06 or E-Ray, this is one upgrade you won’t want to overlook. Be sure to like, comment, and subscribe for more Corvette C8 Z06 installs, reviews, and performance upgrades. Visit radiatorgrillestore.com for more.

Upgrade the front end of your 2023+ Chevrolet Corvette C8 Z06 with the EOS 3-Piece Front Splitter, designed to enhance both style and presence. This kit adds a sharper, more aggressive look to your Z06 while complementing the factory body lines for a seamless fit. Engineered specifically for the C8 Z06 and E-Ray, the three-piece design delivers a bold, performance-inspired appearance without compromising practicality. Whether you're aiming for a track-ready aesthetic or simply want to elevate your street presence, this splitter makes an immediate visual impact. Available in: • Carbon Flash Metallic • Real Carbon Fiber Designed for straightforward installation, this kit allows you to transform the look of your Z06 with minimal downtime. If you're looking to give your Corvette a more aggressive stance and refined edge, the EOS 3-Piece Front Splitter is the perfect addition. Be sure to like, comment, and subscribe for more Corvette C8 Z06 upgrades and installation content. Visit radiatorgrillestore.com for more.

Recently acquired a set of wheel spacers from Paragon Performance to install on a Corvette C8 Z06. This installation goes hand in hand with lowering the Z06 with the front-end lift option. Explore radiatorgrillestore.com for C8 grilles, side intakes, and modifications.